FHIR IG analytics| Package | hl7.fhir.uv.xver-r5.r4 |
| Resource Type | ValueSet |
| Id | ValueSet-R5-v3-ECGObservationSeriesType-for-R4.json |
| FHIR Version | R4 |
| Source | http://hl7.org/fhir/uv/xver-r5.r4/0.1.0/ValueSet-R5-v3-ECGObservationSeriesType-for-R4.html |
| URL | http://hl7.org/fhir/uv/xver/ValueSet/R5-v3-ECGObservationSeriesType-for-R4 |
| Version | 0.1.0 |
| Status | active |
| Date | 2026-03-17T21:02:03.8104715+00:00 |
| Name | R5V3ECGObservationSeriesTypeForR4 |
| Title | Cross-version ValueSet R5.ECGObservationSeriesType for use in FHIR R4 |
| Realm | uv |
| Authority | hl7 |
| Description | This cross-version ValueSet represents content from `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0` for use in FHIR R4. |
| Purpose | This value set is part of the cross-version definitions generated to enable use of the value set `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0` as defined in FHIR R5 in FHIR R4. The source value set is bound to the following FHIR R5 elements: * Note that all concepts are included in this cross-version definition because no concepts have compatible representations Following are the generation technical comments: FHIR ValueSet `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0`, defined in FHIR R5 does not have any mapping to FHIR R4 |
No resources found
| CodeSystem | ||
| hl7.terminology#current | v3-ActCode | ActCode |
Note: links and images are rebased to the (stated) source
Generated Narrative: ValueSet R5-v3-ECGObservationSeriesType-for-R4
This value set expansion contains 2 concepts.
| System | Version | Code | Display | Definition |
http://terminology.hl7.org/CodeSystem/v3-ActCode | 8.0.0 | REPRESENTATIVE_BEAT | ECG representative beat waveforms | This Observation Series type contains waveforms of a "representative beat" (a.k.a. "median beat" or "average beat"). The waveform samples are measured in relative time, relative to the beginning of the beat as defined by the Observation Series effective time. The waveforms are not directly acquired from the subject, but rather algorithmically derived from the "rhythm" waveforms. |
http://terminology.hl7.org/CodeSystem/v3-ActCode | 8.0.0 | RHYTHM | ECG rhythm waveforms | This Observation type contains ECG "rhythm" waveforms. The waveform samples are measured in absolute time (a.k.a. "subject time" or "effective time"). These waveforms are usually "raw" with some minimal amount of noise reduction and baseline filtering applied. |
FHIR
FHIRsmith{
"resourceType": "ValueSet",
"id": "R5-v3-ECGObservationSeriesType-for-R4",
"text": {
"status": "generated",
"div": "<!-- snip (see above) -->"
},
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
"valueCode": "fhir"
},
{
"extension": [
{
"url": "packageId",
"valueId": "hl7.fhir.uv.xver-r5.r4"
},
{
"url": "version",
"valueString": "0.1.0"
},
{
"url": "uri",
"valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r4"
}
],
"url": "http://hl7.org/fhir/StructureDefinition/package-source"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
"valueInteger": 0,
"_valueInteger": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
"valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r4"
}
]
}
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
"valueCode": "trial-use",
"_valueCode": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
"valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r4"
}
]
}
}
],
"url": "http://hl7.org/fhir/uv/xver/ValueSet/R5-v3-ECGObservationSeriesType-for-R4",
"version": "0.1.0",
"name": "R5V3ECGObservationSeriesTypeForR4",
"title": "Cross-version ValueSet R5.ECGObservationSeriesType for use in FHIR R4",
"status": "active",
"experimental": false,
"date": "2026-03-17T21:02:03.8104715+00:00",
"publisher": "FHIR Infrastructure",
"contact": [
{
"name": "FHIR Infrastructure",
"telecom": [
{
"system": "url",
"value": "http://www.hl7.org/Special/committees/fiwg"
}
]
}
],
"description": "This cross-version ValueSet represents content from `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0` for use in FHIR R4.",
"jurisdiction": [
{
"coding": [
{
"system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
"code": "001",
"display": "World"
}
]
}
],
"purpose": "This value set is part of the cross-version definitions generated to enable use of the\r\nvalue set `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0` as defined in FHIR R5\r\nin FHIR R4.\r\n\r\nThe source value set is bound to the following FHIR R5 elements:\r\n* \r\n\r\nNote that all concepts are included in this cross-version definition because no concepts have compatible representations\r\n\r\nFollowing are the generation technical comments:\r\n\nFHIR ValueSet `http://terminology.hl7.org/ValueSet/v3-ECGObservationSeriesType|2.0.0`, defined in FHIR R5 does not have any mapping to FHIR R4",
"compose": {
"include": [
{
"system": "http://terminology.hl7.org/CodeSystem/v3-ActCode",
"version": "8.0.0",
"concept": [
{
"code": "REPRESENTATIVE_BEAT",
"display": "ECG representative beat waveforms"
},
{
"code": "RHYTHM",
"display": "ECG rhythm waveforms"
}
]
}
]
},
"expansion": {
"timestamp": "2026-03-17T21:02:03.8104715+00:00",
"contains": [
{
"system": "http://terminology.hl7.org/CodeSystem/v3-ActCode",
"version": "8.0.0",
"code": "REPRESENTATIVE_BEAT",
"display": "ECG representative beat waveforms"
},
{
"system": "http://terminology.hl7.org/CodeSystem/v3-ActCode",
"version": "8.0.0",
"code": "RHYTHM",
"display": "ECG rhythm waveforms"
}
]
}
}