FHIR IG analytics
| Package | hl7.fhir.uv.xver-r5.r4 |
| Resource Type | ValueSet |
| Id | ValueSet-R5-attribute-estimate-type-for-R4.json |
| FHIR Version | R4 |
| Source | http://hl7.org/fhir/uv/xver-r5.r4/0.1.0/ValueSet-R5-attribute-estimate-type-for-R4.html |
| URL | http://hl7.org/fhir/uv/xver/ValueSet/R5-attribute-estimate-type-for-R4 |
| Version | 0.1.0 |
| Status | active |
| Date | 2026-03-17T21:02:03.8104715+00:00 |
| Name | R5AttributeEstimateTypeForR4 |
| Title | Cross-version ValueSet R5.AttributeEstimateType for use in FHIR R4 |
| Realm | uv |
| Authority | hl7 |
| Description | This cross-version ValueSet represents content from `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0` for use in FHIR R4. |
| Purpose | This value set is part of the cross-version definitions generated to enable use of the
value set `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0` as defined in FHIR R5
in FHIR R4.
The source value set is bound to the following FHIR R5 elements:
* `Evidence.statistic.attributeEstimate.type` as Extensible
Across FHIR versions, the value set has been mapped as:
* `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0`
* `http://hl7.org/fhir/ValueSet/attribute-estimate-type|4.3.0`
Note that all concepts are included in this cross-version definition because no concepts have compatible representations
Following are the generation technical comments:
All concepts in the comparison are listed as identical.
The source and target value sets have the same number of active concepts (11).
FHIR ValueSet `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0`, defined in FHIR R5 does not have any mapping to FHIR R4 |
Resources that use this resource
Resources that this resource uses
Narrative
Note: links and images are rebased to the (stated) source
This value set expansion contains 11 concepts.
| System | Version | Code | Display | Definition |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | 0000037 | Standard error of the mean | The standard deviation of the sample-mean's estimate of a population mean. It is calculated by dividing the sample standard deviation (i.e., the sample-based estimate of the standard deviation of the population) by the square root of n , the size (number of observations) of the sample. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | 0000419 | Cochran's Q statistic | A measure of heterogeneity accros study computed by summing the squared deviations of each study's estimate from the overall meta-analytic estimate, weighting each study's contribution in the same manner as in the meta-analysis. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | 0000420 | I-squared | The percentage of total variation across studies that is due to heterogeneity rather than chance. I2 can be readily calculated from basic results obtained from a typical meta-analysis as i2 = 100%×(q - df)/q, where q is cochran's heterogeneity statistic and df the degrees of freedom. Negative values of i2 are put equal to zero so that i2 lies between 0% and 100%. A value of 0% indicates no observed heterogeneity, and larger values show increasing heterogeneity. Unlike cochran's q, it does not inherently depend upon the number of studies considered. A confidence interval for i² is constructed using either i) the iterative non-central chi-squared distribution method of hedges and piggott (2001); or ii) the test-based method of higgins and thompson (2002). The non-central chi-square method is currently the method of choice (higgins, personal communication, 2006) – it is computed if the 'exact' option is selected. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | 0000421 | Tau squared | An estimate of the between-study variance in a random-effects meta-analysis. The square root of this number (i.e. Tau) is the estimated standard deviation of underlying effects across studies. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | 0000455 | Credible interval | An interval of a posterior distribution which is such that the density at any point inside the interval is greater than the density at any point outside and that the area under the curve for that interval is equal to a prespecified probability level. For any probability level there is generally only one such interval, which is also often known as the highest posterior density region. Unlike the usual confidence interval associated with frequentist inference, here the intervals specify the range within which parameters lie with a certain probability. The bayesian counterparts of the confidence interval used in frequentists statistics. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C38013 | Range | The difference between the lowest and highest numerical values; the limits or scale of variation. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C44185 | P-value | The probability of obtaining the results obtained, or more extreme results, if the hypothesis being tested and all other model assumptions are true. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C48918 | Variance | A measure of the variability in a sample or population. It is calculated as the mean squared deviation (MSD) of the individual values from their common mean. In calculating the MSD, the divisor n is commonly used for a population variance and the divisor n-1 for a sample variance. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C53245 | Interquartile range | The difference between the 3d and 1st quartiles is called the interquartile range and it is used as a measure of variability (dispersion). |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C53322 | Standard deviation | A measure of the range of values in a set of numbers. Standard deviation is a statistic used as a measure of the dispersion or variation in a distribution, equal to the square root of the arithmetic mean of the squares of the deviations from the arithmetic mean. |
http://terminology.hl7.org/CodeSystem/attribute-estimate-type | 0.1.0 | C53324 | Confidence interval | A range of values considered compatible with the observed data at the specified confidence level. |
Source1
{
"resourceType": "ValueSet",
"id": "R5-attribute-estimate-type-for-R4",
"text": {
"status": "generated",
"div": "<!-- snip (see above) -->"
},
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
"valueInteger": 1
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
"valueCode": "cds"
},
{
"extension": [
{
"url": "packageId",
"valueId": "hl7.fhir.uv.xver-r5.r4"
},
{
"url": "version",
"valueString": "0.1.0"
},
{
"url": "uri",
"valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r4"
}
],
"url": "http://hl7.org/fhir/StructureDefinition/package-source"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
"valueCode": "trial-use",
"_valueCode": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
"valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r4"
}
]
}
}
],
"url": "http://hl7.org/fhir/uv/xver/ValueSet/R5-attribute-estimate-type-for-R4",
"version": "0.1.0",
"name": "R5AttributeEstimateTypeForR4",
"title": "Cross-version ValueSet R5.AttributeEstimateType for use in FHIR R4",
"status": "active",
"experimental": false,
"date": "2026-03-17T21:02:03.8104715+00:00",
"publisher": "Clinical Decision Support",
"contact": [
{
"name": "Clinical Decision Support",
"telecom": [
{
"system": "url",
"value": "http://www.hl7.org/Special/committees/dss"
}
]
}
],
"description": "This cross-version ValueSet represents content from `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0` for use in FHIR R4.",
"jurisdiction": [
{
"coding": [
{
"system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
"code": "001",
"display": "World"
}
]
}
],
"purpose": "This value set is part of the cross-version definitions generated to enable use of the\r\nvalue set `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0` as defined in FHIR R5\r\nin FHIR R4.\r\n\r\nThe source value set is bound to the following FHIR R5 elements:\r\n* `Evidence.statistic.attributeEstimate.type` as Extensible\r\n\r\nAcross FHIR versions, the value set has been mapped as:\r\n* `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0`\n* `http://hl7.org/fhir/ValueSet/attribute-estimate-type|4.3.0`\r\n\r\nNote that all concepts are included in this cross-version definition because no concepts have compatible representations\r\n\r\nFollowing are the generation technical comments:\r\nAll concepts in the comparison are listed as identical.\nThe source and target value sets have the same number of active concepts (11).\nFHIR ValueSet `http://hl7.org/fhir/ValueSet/attribute-estimate-type|5.0.0`, defined in FHIR R5 does not have any mapping to FHIR R4",
"compose": {
"include": [
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"concept": [
{
"code": "0000037",
"display": "Standard error of the mean"
},
{
"code": "0000419",
"display": "Cochran's Q statistic"
},
{
"code": "0000420",
"display": "I-squared"
},
{
"code": "0000421",
"display": "Tau squared"
},
{
"code": "0000455",
"display": "Credible interval"
},
{
"code": "C38013",
"display": "Range"
},
{
"code": "C44185",
"display": "P-value"
},
{
"code": "C48918",
"display": "Variance"
},
{
"code": "C53245",
"display": "Interquartile range"
},
{
"code": "C53322",
"display": "Standard deviation"
},
{
"code": "C53324",
"display": "Confidence interval"
}
]
}
]
},
"expansion": {
"timestamp": "2026-03-17T21:02:03.8104715+00:00",
"contains": [
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "0000037",
"display": "Standard error of the mean"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "0000419",
"display": "Cochran's Q statistic"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "0000420",
"display": "I-squared"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "0000421",
"display": "Tau squared"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "0000455",
"display": "Credible interval"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C38013",
"display": "Range"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C44185",
"display": "P-value"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C48918",
"display": "Variance"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C53245",
"display": "Interquartile range"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C53322",
"display": "Standard deviation"
},
{
"system": "http://terminology.hl7.org/CodeSystem/attribute-estimate-type",
"version": "0.1.0",
"code": "C53324",
"display": "Confidence interval"
}
]
}
}
FHIR
FHIRsmith