FHIR © HL7.org  |  FHIRsmith 4.0.1  |  Server Home  |  XIG Home  |  XIG Stats  | 

FHIR IG analytics

Packagehl7.fhir.uv.xver-r5.r3
Resource TypeConceptMap
IdConceptMap-R5-RegulatedAuthorization-element-map-to-R3.json
FHIR VersionR3
Sourcehttp://hl7.org/fhir/uv/xver-r5.r3/0.1.0/ConceptMap-R5-RegulatedAuthorization-element-map-to-R3.html
URLhttp://hl7.org/fhir/uv/xver/ConceptMap/R5-RegulatedAuthorization-element-map-to-R3
Version0.1.0
Statusactive
Date2026-03-17T16:05:20.2743338-05:00
NameR5RegulatedAuthorizationElementMapToR3
TitleCross-version mapping for FHIR R5 RegulatedAuthorization to FHIR STU3 Basic
Realmuv
Authorityhl7
DescriptionThis ConceptMap represents cross-version mappings for elements from a FHIR R5 RegulatedAuthorization to FHIR STU3.

Resources that use this resource

No resources found


Resources that this resource uses

StructureDefinition
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.attachedDocumentR5: Additional information or supporting documentation about the authorization (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.basisR5: The legal/regulatory framework or reasons under which this authorization is granted (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.caseR5: The case or regulatory procedure for granting or amending a regulated authorization. Note: This area is subject to ongoing review and the workgroup is seeking implementer feedback on its use (see link at bottom of page) (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.descriptionR5: General textual supporting information (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.holderR5: The organization that has been granted this authorization, by the regulator (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.indicationR5: Condition for which the use of the regulated product applies (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.intendedUseR5: The intended use of the product, e.g. prevention, treatment (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.regionR5: The territory in which the authorization has been granted (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.regulatorR5: The regulatory authority or authorizing body granting the authorization (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.statusR5: The status that is authorised e.g. approved. Intermediate states can be tracked with cases and applications (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.statusDateR5: The date at which the current status was assigned (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.typeR5: Overall type of this authorization, for example drug marketing approval, orphan drug designation (new)
hl7.fhir.uv.xver-r5.r4#0.1.0extension-RegulatedAuthorization.validityPeriodR5: The time period in which the regulatory approval etc. is in effect, e.g. a Marketing Authorization includes the date of authorization and/or expiration date (new)

Narrative

Note: links and images are rebased to the (stated) source

Generated Narrative: ConceptMap R5-RegulatedAuthorization-element-map-to-R3

Mapping from http://hl7.org/fhir/5.0 to http://hl7.org/fhir/3.0


Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to http://hl7.org/fhir/StructureDefinition/Basic|3.0.2

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead. Element `RegulatedAuthorization.meta` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead. Element `RegulatedAuthorization.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
RegulatedAuthorization.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead. Element `RegulatedAuthorization.language` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
RegulatedAuthorization.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead. Element `RegulatedAuthorization.text` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
RegulatedAuthorization.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead. Element `RegulatedAuthorization.contained` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
RegulatedAuthorization.identifier (identifier)is equivalent toBasic.identifierElement matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead. Element `RegulatedAuthorization.identifier` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.subject (subject)is equivalent toBasic.subjectElement matches Basic element path `Basic.subject` (`Basic.subject`), use that element instead. Element `RegulatedAuthorization.subject` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: Overall type of this authorization, for example drug marketing approval, orphan drug designation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.type (type)maps to wider conceptExtension (R5: Overall type of this authorization, for example drug marketing approval, orphan drug designation (new))Element `RegulatedAuthorization.type` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: General textual supporting information (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.description (description)maps to wider conceptExtension (R5: General textual supporting information (new))Element `RegulatedAuthorization.description` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The territory in which the authorization has been granted (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.region (region)maps to wider conceptExtension (R5: The territory in which the authorization has been granted (new))Element `RegulatedAuthorization.region` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.region` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The status that is authorised e.g. approved. Intermediate states can be tracked with cases and applications (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.status (status)maps to wider conceptExtension (R5: The status that is authorised e.g. approved. Intermediate states can be tracked with cases and applications (new))Element `RegulatedAuthorization.status` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The date at which the current status was assigned (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.statusDate (statusDate)maps to wider conceptExtension (R5: The date at which the current status was assigned (new))Element `RegulatedAuthorization.statusDate` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.statusDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The time period in which the regulatory approval etc. is in effect, e.g. a Marketing Authorization includes the date of authorization and/or expiration date (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.validityPeriod (validityPeriod)maps to wider conceptExtension (R5: The time period in which the regulatory approval etc. is in effect, e.g. a Marketing Authorization includes the date of authorization and/or expiration date (new))Element `RegulatedAuthorization.validityPeriod` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.validityPeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: Condition for which the use of the regulated product applies (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.indication (indication)maps to wider conceptExtension (R5: Condition for which the use of the regulated product applies (new))Element `RegulatedAuthorization.indication` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.indication` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The intended use of the product, e.g. prevention, treatment (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.intendedUse (intendedUse)maps to wider conceptExtension (R5: The intended use of the product, e.g. prevention, treatment (new))Element `RegulatedAuthorization.intendedUse` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.intendedUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The legal/regulatory framework or reasons under which this authorization is granted (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.basis (basis)maps to wider conceptExtension (R5: The legal/regulatory framework or reasons under which this authorization is granted (new))Element `RegulatedAuthorization.basis` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.basis` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 11 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The organization that has been granted this authorization, by the regulator (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.holder (holder)maps to wider conceptExtension (R5: The organization that has been granted this authorization, by the regulator (new))Element `RegulatedAuthorization.holder` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.holder` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 12 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The regulatory authority or authorizing body granting the authorization (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.regulator (regulator)maps to wider conceptExtension (R5: The regulatory authority or authorizing body granting the authorization (new))Element `RegulatedAuthorization.regulator` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.regulator` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 13 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: Additional information or supporting documentation about the authorization (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.attachedDocument (attachedDocument)maps to wider conceptExtension (R5: Additional information or supporting documentation about the authorization (new))Element `RegulatedAuthorization.attachedDocument` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.attachedDocument` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 14 Mapping from http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization|5.0.0 to R5: The case or regulatory procedure for granting or amending a regulated authorization. Note: This area is subject to ongoing review and the workgroup is seeking implementer feedback on its use (see link at bottom of page) (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
RegulatedAuthorization.case (case)maps to wider conceptExtension (R5: The case or regulatory procedure for granting or amending a regulated authorization. Note: This area is subject to ongoing review and the workgroup is seeking implementer feedback on its use (see link at bottom of page) (new))Element `RegulatedAuthorization.case` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.case.identifier (identifier)maps to wider conceptExtension.extension:identifier (R5: Identifier by which this case can be referenced (new))Element `RegulatedAuthorization.case.identifier` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension. Element `RegulatedAuthorization.case.identifier` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.case.type (type)maps to wider conceptExtension.extension:type (R5: The defining type of case (new))Element `RegulatedAuthorization.case.type` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension. Element `RegulatedAuthorization.case.type` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.case.status (status)maps to wider conceptExtension.extension:status (R5: The status associated with the case (new))Element `RegulatedAuthorization.case.status` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension. Element `RegulatedAuthorization.case.status` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.case.date[x] (date[x])maps to wider conceptExtension.extension:date (R5: Relevant date for this case (new))Element `RegulatedAuthorization.case.date[x]` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension. Element `RegulatedAuthorization.case.date[x]` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case.date[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
RegulatedAuthorization.case.application (application)maps to wider conceptExtension.extension:application (R5: Applications submitted to obtain a regulated authorization. Steps within the longer running case or procedure (new))Element `RegulatedAuthorization.case.application` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension. Element `RegulatedAuthorization.case.application` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped. Element `RegulatedAuthorization.case.application` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Source1

{
  "resourceType": "ConceptMap",
  "id": "R5-RegulatedAuthorization-element-map-to-R3",
  "text": {
    "status": "generated",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "fhir"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 0,
      "_valueInteger": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"
          }
        ]
      }
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use",
      "_valueCode": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"
          }
        ]
      }
    }
  ],
  "url": "http://hl7.org/fhir/uv/xver/ConceptMap/R5-RegulatedAuthorization-element-map-to-R3",
  "version": "0.1.0",
  "name": "R5RegulatedAuthorizationElementMapToR3",
  "title": "Cross-version mapping for FHIR R5 RegulatedAuthorization to FHIR STU3 Basic",
  "status": "active",
  "experimental": false,
  "date": "2026-03-17T16:05:20.2743338-05:00",
  "contact": [
    {
      "name": "FHIR Infrastructure",
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/fiwg"
        }
      ]
    }
  ],
  "description": "This ConceptMap represents cross-version mappings for elements from a FHIR R5 RegulatedAuthorization to FHIR STU3.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001",
          "display": "World"
        }
      ]
    }
  ],
  "sourceUri": "http://hl7.org/fhir/5.0",
  "targetUri": "http://hl7.org/fhir/3.0",
  "group": [
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/StructureDefinition/Basic",
      "targetVersion": "3.0.2",
      "element": [
        {
          "code": "RegulatedAuthorization.meta",
          "display": "meta",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.meta",
              "display": "Basic.meta",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `RegulatedAuthorization.meta` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.implicitRules",
          "display": "implicitRules",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.implicitRules",
              "display": "Basic.implicitRules",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `RegulatedAuthorization.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.language",
          "display": "language",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.language",
              "display": "Basic.language",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `RegulatedAuthorization.language` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.text",
          "display": "text",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.text",
              "display": "Basic.text",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `RegulatedAuthorization.text` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.contained",
          "display": "contained",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.contained",
              "display": "Basic.contained",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `RegulatedAuthorization.contained` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.identifier",
          "display": "identifier",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.identifier",
              "display": "Basic.identifier",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `RegulatedAuthorization.identifier` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.subject",
          "display": "subject",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.subject",
              "display": "Basic.subject",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.subject` (`Basic.subject`), use that element instead.\nElement `RegulatedAuthorization.subject` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.type",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.type",
          "display": "type",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.type` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.description",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.description",
          "display": "description",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.description` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.region",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.region",
          "display": "region",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.region` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.region` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.status",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.status",
          "display": "status",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.status` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.statusDate",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.statusDate",
          "display": "statusDate",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.statusDate` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.statusDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.validityPeriod",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.validityPeriod",
          "display": "validityPeriod",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.validityPeriod` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.validityPeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.indication",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.indication",
          "display": "indication",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.indication` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.indication` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.intendedUse",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.intendedUse",
          "display": "intendedUse",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.intendedUse` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.intendedUse` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.basis",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.basis",
          "display": "basis",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.basis` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.basis` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.holder",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.holder",
          "display": "holder",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.holder` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.holder` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.regulator",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.regulator",
          "display": "regulator",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.regulator` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.regulator` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.attachedDocument",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.attachedDocument",
          "display": "attachedDocument",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.attachedDocument` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.attachedDocument` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/RegulatedAuthorization",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-RegulatedAuthorization.case",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "RegulatedAuthorization.case",
          "display": "case",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.case.identifier",
          "display": "identifier",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:identifier",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case.identifier` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension.\nElement `RegulatedAuthorization.case.identifier` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.case.type",
          "display": "type",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:type",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case.type` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension.\nElement `RegulatedAuthorization.case.type` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case.type` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.case.status",
          "display": "status",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:status",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case.status` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension.\nElement `RegulatedAuthorization.case.status` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.case.date[x]",
          "display": "date[x]",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:date",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case.date[x]` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension.\nElement `RegulatedAuthorization.case.date[x]` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case.date[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "RegulatedAuthorization.case.application",
          "display": "application",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:application",
              "equivalence": "wider",
              "comment": "Element `RegulatedAuthorization.case.application` is part of an existing definition because parent element `RegulatedAuthorization.case` requires a cross-version extension.\nElement `RegulatedAuthorization.case.application` is not mapped to FHIR STU3, since FHIR R5 `RegulatedAuthorization` is not mapped.\nElement `RegulatedAuthorization.case.application` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    }
  ]
}