FHIR © HL7.org  |  FHIRsmith 4.0.1  |  Server Home  |  XIG Home  |  XIG Stats  | 

FHIR IG analytics

Packagehl7.fhir.uv.xver-r5.r3
Resource TypeConceptMap
IdConceptMap-R5-ObservationDefinition-element-map-to-R3.json
FHIR VersionR3
Sourcehttp://hl7.org/fhir/uv/xver-r5.r3/0.1.0/ConceptMap-R5-ObservationDefinition-element-map-to-R3.html
URLhttp://hl7.org/fhir/uv/xver/ConceptMap/R5-ObservationDefinition-element-map-to-R3
Version0.1.0
Statusactive
Date2026-03-17T16:05:19.4156206-05:00
NameR5ObservationDefinitionElementMapToR3
TitleCross-version mapping for FHIR R5 ObservationDefinition to FHIR STU3 Basic
Realmuv
Authorityhl7
DescriptionThis ConceptMap represents cross-version mappings for elements from a FHIR R5 ObservationDefinition to FHIR STU3.

Resources that use this resource

No resources found


Resources that this resource uses

StructureDefinition
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.bodySiteCross-version Extension for R5.ObservationDefinition.bodySite for use in FHIR R4
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.categoryR5: General type of observation (new)
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.codeR5: Type of observation (new)
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.componentCross-version Extension for R5.ObservationDefinition.component for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.derivedFromCanonicalCross-version Extension for R5.ObservationDefinition.derivedFromCanonical for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.derivedFromUriCross-version Extension for R5.ObservationDefinition.derivedFromUri for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.deviceCross-version Extension for R5.ObservationDefinition.device for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.hasMemberCross-version Extension for R5.ObservationDefinition.hasMember for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.jurisdictionCross-version Extension for R5.ObservationDefinition.jurisdiction for use in FHIR R4
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.methodR5: Method used to produce the observation (new)
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.multipleResultsAllowedR5: Multiple results allowed for conforming observations (new)
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.performerTypeCross-version Extension for R5.ObservationDefinition.performerType for use in FHIR R4
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.permittedDataTypeR5: Quantity | CodeableConcept | string | boolean | integer | Range | Ratio | SampledData | time | dateTime | Period (new)
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.permittedUnitCross-version Extension for R5.ObservationDefinition.permittedUnit for use in FHIR R4
hl7.fhir.uv.xver-r5.r3#0.1.0extension-ObservationDefinition.preferredReportNameR5: The preferred name to be used when reporting the observation results (new)
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.qualifiedValueCross-version Extension for R5.ObservationDefinition.qualifiedValue for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.specimenCross-version Extension for R5.ObservationDefinition.specimen for use in FHIR R4
hl7.fhir.uv.xver-r5.r4.r4#0.0.1-snapshot-2extension-ObservationDefinition.subjectCross-version Extension for R5.ObservationDefinition.subject for use in FHIR R4

Narrative

Note: links and images are rebased to the (stated) source

Generated Narrative: ConceptMap R5-ObservationDefinition-element-map-to-R3

Mapping from http://hl7.org/fhir/5.0 to http://hl7.org/fhir/3.0


Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to http://hl7.org/fhir/StructureDefinition/Basic|3.0.2

Source CodeRelationshipTarget CodeComment
ObservationDefinition.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead. Element `ObservationDefinition.meta` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead. Element `ObservationDefinition.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
ObservationDefinition.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead. Element `ObservationDefinition.language` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
ObservationDefinition.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead. Element `ObservationDefinition.text` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
ObservationDefinition.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead. Element `ObservationDefinition.contained` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
ObservationDefinition.identifier (identifier)is equivalent toBasic.identifierElement matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead. Element `ObservationDefinition.identifier` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This is a business identifier, not a resource identifier. It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types.

Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Intended jurisdiction for this ObservationDefinition (if applicable) (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.jurisdiction (jurisdiction)maps to wider conceptExtension (R5: Intended jurisdiction for this ObservationDefinition (if applicable) (new))Element `ObservationDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Element `ObservationDefinition.jurisdiction` has been flagged as deprecated. It may be possible for the ObservationDefinition to be used in jurisdictions other than those for which it was originally designed or intended. DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)

Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Based on FHIR definition of another observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.derivedFromCanonical (derivedFromCanonical)maps to wider conceptExtension (R5: Based on FHIR definition of another observation (new))Element `ObservationDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Based on external definition (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.derivedFromUri (derivedFromUri)maps to wider conceptExtension (R5: Based on external definition (new))Element `ObservationDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Type of subject for the defined observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.subject (subject)maps to wider conceptExtension (R5: Type of subject for the defined observation (new))Element `ObservationDefinition.subject` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). While the source element matches Basic element path `` (``), the definitions are not compatible (source: `CodeableConcept`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Resource)`:0..1). Examples: person, animal, device, air, surface ….

Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Desired kind of performer for such kind of observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.performerType (performerType)maps to wider conceptExtension (R5: Desired kind of performer for such kind of observation (new))Element `ObservationDefinition.performerType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.performerType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: General type of observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.category (category)maps to wider conceptExtension (R5: General type of observation (new))Element `ObservationDefinition.category` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.category` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used for one instance of ObservationDefinition. The level of granularity is defined by the category concepts in the value set.

Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Type of observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.code (code)maps to wider conceptExtension (R5: Type of observation (new))Element `ObservationDefinition.code` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Quantity | CodeableConcept | string | boolean | integer | Range | Ratio | SampledData | time | dateTime | Period (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.permittedDataType (permittedDataType)maps to wider conceptExtension (R5: Quantity | CodeableConcept | string | boolean | integer | Range | Ratio | SampledData | time | dateTime | Period (new))Element `ObservationDefinition.permittedDataType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.permittedDataType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Multiple results allowed for conforming observations (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.multipleResultsAllowed (multipleResultsAllowed)maps to wider conceptExtension (R5: Multiple results allowed for conforming observations (new))Element `ObservationDefinition.multipleResultsAllowed` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.multipleResultsAllowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An example of observation allowing multiple results is "bacteria identified by culture". Conversely, the measurement of a potassium level allows a single result.

Group 11 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Body part to be observed (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.bodySite (bodySite)maps to wider conceptExtension (R5: Body part to be observed (new))Element `ObservationDefinition.bodySite` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.bodySite` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Only used if the defined observation is to be made directly on a body part and if this body part is not implied by code found in ObservationDefinition.code. Not used for in vitro diagnostic observations. Example: 14975008 |Forearm structure|.

Group 12 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Method used to produce the observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.method (method)maps to wider conceptExtension (R5: Method used to produce the observation (new))Element `ObservationDefinition.method` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.method` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Only used if not implicit in observation code Example: 702659008 |Automated count technique|.

Group 13 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Kind of specimen used by this type of observation (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.specimen (specimen)maps to wider conceptExtension (R5: Kind of specimen used by this type of observation (new))Element `ObservationDefinition.specimen` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.specimen` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Only used for in vitro observations. When multiple occurrences of specimen are present, they are to be combined with a logical AND: all specified specimens are needed for the observation.

Group 14 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Measurement device or model of device (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.device (device)maps to wider conceptExtension (R5: Measurement device or model of device (new))Element `ObservationDefinition.device` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). When multiple occurrences of device are present, they are to be combined with a logical OR: at least one of the specified devices is used to produce the observation.

Group 15 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: The preferred name to be used when reporting the observation results (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.preferredReportName (preferredReportName)maps to wider conceptExtension (R5: The preferred name to be used when reporting the observation results (new))Element `ObservationDefinition.preferredReportName` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.preferredReportName` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 16 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Unit for quantitative results (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.permittedUnit (permittedUnit)maps to wider conceptExtension (R5: Unit for quantitative results (new))Element `ObservationDefinition.permittedUnit` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.permittedUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 17 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Set of qualified values for observation results (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.qualifiedValue (qualifiedValue)maps to wider conceptExtension (R5: Set of qualified values for observation results (new))Element `ObservationDefinition.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.context (context)maps to wider conceptExtension.extension:context (R5: Context qualifier for the set of qualified values (new))Element `ObservationDefinition.qualifiedValue.context` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.context` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.context` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.appliesTo (appliesTo)maps to wider conceptExtension.extension:appliesTo (R5: Targetted population for the set of qualified values (new))Element `ObservationDefinition.qualifiedValue.appliesTo` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.appliesTo` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.appliesTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). If this element is not present then the global population is assumed.
ObservationDefinition.qualifiedValue.gender (gender)maps to wider conceptExtension.extension:gender (R5: male | female | other | unknown (new))Element `ObservationDefinition.qualifiedValue.gender` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.gender` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.gender` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.age (age)maps to wider conceptExtension.extension:age (R5: Applicable age range for the set of qualified values (new))Element `ObservationDefinition.qualifiedValue.age` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.age` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.age` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Some analytes vary greatly over age.
ObservationDefinition.qualifiedValue.gestationalAge (gestationalAge)maps to wider conceptExtension.extension:gestationalAge (R5: Applicable gestational age range for the set of qualified values (new))Element `ObservationDefinition.qualifiedValue.gestationalAge` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.gestationalAge` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.gestationalAge` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.condition (condition)maps to wider conceptExtension.extension:condition (R5: Condition associated with the set of qualified values (new))Element `ObservationDefinition.qualifiedValue.condition` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.condition` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.condition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.rangeCategory (rangeCategory)maps to wider conceptExtension.extension:rangeCategory (R5: reference | critical | absolute (new))Element `ObservationDefinition.qualifiedValue.rangeCategory` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.rangeCategory` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.rangeCategory` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.range (range)maps to wider conceptExtension.extension:range (R5: The range for continuous or ordinal observations (new))Element `ObservationDefinition.qualifiedValue.range` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.range` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.range` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.validCodedValueSet (validCodedValueSet)maps to wider conceptExtension.extension:validCodedValueSet (R5: Value set of valid coded values as part of this set of qualified values (new))Element `ObservationDefinition.qualifiedValue.validCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.validCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.validCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.normalCodedValueSet (normalCodedValueSet)maps to wider conceptExtension.extension:normalCodedValueSet (R5: Value set of normal coded values as part of this set of qualified values (new))Element `ObservationDefinition.qualifiedValue.normalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.normalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.normalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.abnormalCodedValueSet (abnormalCodedValueSet)maps to wider conceptExtension.extension:abnormalCodedValueSet (R5: Value set of abnormal coded values as part of this set of qualified values (new))Element `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.qualifiedValue.criticalCodedValueSet (criticalCodedValueSet)maps to wider conceptExtension.extension:criticalCodedValueSet (R5: Value set of critical coded values as part of this set of qualified values (new))Element `ObservationDefinition.qualifiedValue.criticalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension. Element `ObservationDefinition.qualifiedValue.criticalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.qualifiedValue.criticalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.component.qualifiedValue (qualifiedValue)maps to wider conceptExtension.extension:qualifiedValueElement `ObservationDefinition.component.qualifiedValue` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension. Element `ObservationDefinition.component.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 18 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Definitions of related resources belonging to this kind of observation group (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.hasMember (hasMember)maps to wider conceptExtension (R5: Definitions of related resources belonging to this kind of observation group (new))Element `ObservationDefinition.hasMember` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.hasMember` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Group 19 Mapping from http://hl7.org/fhir/StructureDefinition/ObservationDefinition|5.0.0 to R5: Component results (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
ObservationDefinition.component (component)maps to wider conceptExtension (R5: Component results (new))Element `ObservationDefinition.component` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.component.code (code)maps to wider conceptExtension.extension:code (R5: Type of observation (new))Element `ObservationDefinition.component.code` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension. Element `ObservationDefinition.component.code` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.component.permittedDataType (permittedDataType)maps to wider conceptExtension.extension:permittedDataType (R5: Quantity | CodeableConcept | string | boolean | integer | Range | Ratio | SampledData | time | dateTime | Period (new))Element `ObservationDefinition.component.permittedDataType` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension. Element `ObservationDefinition.component.permittedDataType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component.permittedDataType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.component.permittedUnit (permittedUnit)maps to wider conceptExtension.extension:permittedUnit (R5: Unit for quantitative results (new))Element `ObservationDefinition.component.permittedUnit` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension. Element `ObservationDefinition.component.permittedUnit` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component.permittedUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
ObservationDefinition.component.qualifiedValue (qualifiedValue)maps to wider conceptExtension.extension:qualifiedValue (R5: Set of qualified values for observation results (new))Element `ObservationDefinition.component.qualifiedValue` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension. Element `ObservationDefinition.component.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped. Element `ObservationDefinition.component.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Source1

{
  "resourceType": "ConceptMap",
  "id": "R5-ObservationDefinition-element-map-to-R3",
  "text": {
    "status": "generated",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "fhir"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 0,
      "_valueInteger": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"
          }
        ]
      }
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use",
      "_valueCode": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueUri": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r5.r3"
          }
        ]
      }
    }
  ],
  "url": "http://hl7.org/fhir/uv/xver/ConceptMap/R5-ObservationDefinition-element-map-to-R3",
  "version": "0.1.0",
  "name": "R5ObservationDefinitionElementMapToR3",
  "title": "Cross-version mapping for FHIR R5 ObservationDefinition to FHIR STU3 Basic",
  "status": "active",
  "experimental": false,
  "date": "2026-03-17T16:05:19.4156206-05:00",
  "contact": [
    {
      "name": "FHIR Infrastructure",
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/fiwg"
        }
      ]
    }
  ],
  "description": "This ConceptMap represents cross-version mappings for elements from a FHIR R5 ObservationDefinition to FHIR STU3.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001",
          "display": "World"
        }
      ]
    }
  ],
  "sourceUri": "http://hl7.org/fhir/5.0",
  "targetUri": "http://hl7.org/fhir/3.0",
  "group": [
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/StructureDefinition/Basic",
      "targetVersion": "3.0.2",
      "element": [
        {
          "code": "ObservationDefinition.meta",
          "display": "meta",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.meta",
              "display": "Basic.meta",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `ObservationDefinition.meta` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.meta` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.implicitRules",
          "display": "implicitRules",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.implicitRules",
              "display": "Basic.implicitRules",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `ObservationDefinition.implicitRules` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.implicitRules` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc."
            }
          ]
        },
        {
          "code": "ObservationDefinition.language",
          "display": "language",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.language",
              "display": "Basic.language",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `ObservationDefinition.language` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.language` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.text",
          "display": "text",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.text",
              "display": "Basic.text",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `ObservationDefinition.text` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.text` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nContained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later."
            }
          ]
        },
        {
          "code": "ObservationDefinition.contained",
          "display": "contained",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.contained",
              "display": "Basic.contained",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `ObservationDefinition.contained` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.contained` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels."
            }
          ]
        },
        {
          "code": "ObservationDefinition.identifier",
          "display": "identifier",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.identifier",
              "display": "Basic.identifier",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `ObservationDefinition.identifier` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.identifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis is a business identifier, not a resource identifier. It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.jurisdiction",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.jurisdiction",
          "display": "jurisdiction",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nElement `ObservationDefinition.jurisdiction` has been flagged as deprecated.\nIt may be possible for the ObservationDefinition to be used in jurisdictions other than those for which it was originally designed or intended.\n\nDEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element.  (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)"
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.derivedFromCanonical",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.derivedFromCanonical",
          "display": "derivedFromCanonical",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.derivedFromUri",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.derivedFromUri",
          "display": "derivedFromUri",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.subject",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.subject",
          "display": "subject",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.subject` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.subject` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nWhile the source element matches Basic element path `` (``), the definitions are not compatible (source: `CodeableConcept`:0..* -> basic: `Reference(http://hl7.org/fhir/StructureDefinition/Resource)`:0..1).\nExamples: person, animal, device, air, surface …."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.performerType",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.performerType",
          "display": "performerType",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.performerType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.performerType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.category",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.category",
          "display": "category",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.category` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.category` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nThis element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used for one instance of ObservationDefinition. The level of granularity is defined by the category concepts in the value set."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.code",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.code",
          "display": "code",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.code` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.permittedDataType",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.permittedDataType",
          "display": "permittedDataType",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.permittedDataType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.permittedDataType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.multipleResultsAllowed",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.multipleResultsAllowed",
          "display": "multipleResultsAllowed",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.multipleResultsAllowed` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.multipleResultsAllowed` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nAn example of observation allowing multiple results is \"bacteria identified by culture\". Conversely, the measurement of a potassium level allows a single result."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.bodySite",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.bodySite",
          "display": "bodySite",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.bodySite` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.bodySite` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nOnly used if the defined observation is to be made directly on a body part and if this body part is not implied by code found in ObservationDefinition.code. Not used for in vitro diagnostic observations. \nExample: 14975008 |Forearm structure|."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.method",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.method",
          "display": "method",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.method` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.method` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nOnly used if not implicit in observation code\nExample: 702659008 |Automated count technique|."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.specimen",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.specimen",
          "display": "specimen",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.specimen` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.specimen` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nOnly used for in vitro observations. When multiple occurrences of specimen are present, they are to be combined with a logical AND: all specified specimens  are needed for the observation."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.device",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.device",
          "display": "device",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.device` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.device` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nWhen multiple occurrences of device are present, they are to be combined with a logical OR: at least one of the specified devices is used to produce the observation."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.preferredReportName",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.preferredReportName",
          "display": "preferredReportName",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.preferredReportName` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.preferredReportName` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.permittedUnit",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.permittedUnit",
          "display": "permittedUnit",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.permittedUnit` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.permittedUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.qualifiedValue",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.qualifiedValue",
          "display": "qualifiedValue",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.context",
          "display": "context",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:context",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.context` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.context` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.context` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.appliesTo",
          "display": "appliesTo",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:appliesTo",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.appliesTo` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.appliesTo` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.appliesTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nIf this element is not present then the global population is assumed."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.gender",
          "display": "gender",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:gender",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.gender` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.gender` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.gender` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.age",
          "display": "age",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:age",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.age` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.age` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.age` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).\nSome analytes vary greatly over age."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.gestationalAge",
          "display": "gestationalAge",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:gestationalAge",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.gestationalAge` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.gestationalAge` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.gestationalAge` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.condition",
          "display": "condition",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:condition",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.condition` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.condition` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.condition` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.rangeCategory",
          "display": "rangeCategory",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:rangeCategory",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.rangeCategory` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.rangeCategory` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.rangeCategory` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.range",
          "display": "range",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:range",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.range` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.range` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.range` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.validCodedValueSet",
          "display": "validCodedValueSet",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:validCodedValueSet",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.validCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.validCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.validCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.normalCodedValueSet",
          "display": "normalCodedValueSet",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:normalCodedValueSet",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.normalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.normalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.normalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.abnormalCodedValueSet",
          "display": "abnormalCodedValueSet",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:abnormalCodedValueSet",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.abnormalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.qualifiedValue.criticalCodedValueSet",
          "display": "criticalCodedValueSet",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:criticalCodedValueSet",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.qualifiedValue.criticalCodedValueSet` is part of an existing definition because parent element `ObservationDefinition.qualifiedValue` requires a cross-version extension.\nElement `ObservationDefinition.qualifiedValue.criticalCodedValueSet` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.qualifiedValue.criticalCodedValueSet` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.component.qualifiedValue",
          "display": "qualifiedValue",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:qualifiedValue",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component.qualifiedValue` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension.\nElement `ObservationDefinition.component.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.hasMember",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.hasMember",
          "display": "hasMember",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.hasMember` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.hasMember` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/ObservationDefinition",
      "sourceVersion": "5.0.0",
      "target": "http://hl7.org/fhir/5.0/StructureDefinition/extension-ObservationDefinition.component",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "ObservationDefinition.component",
          "display": "component",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.component.code",
          "display": "code",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:code",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component.code` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension.\nElement `ObservationDefinition.component.code` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component.code` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.component.permittedDataType",
          "display": "permittedDataType",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:permittedDataType",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component.permittedDataType` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension.\nElement `ObservationDefinition.component.permittedDataType` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component.permittedDataType` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.component.permittedUnit",
          "display": "permittedUnit",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:permittedUnit",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component.permittedUnit` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension.\nElement `ObservationDefinition.component.permittedUnit` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component.permittedUnit` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "ObservationDefinition.component.qualifiedValue",
          "display": "qualifiedValue",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:qualifiedValue",
              "equivalence": "wider",
              "comment": "Element `ObservationDefinition.component.qualifiedValue` is part of an existing definition because parent element `ObservationDefinition.component` requires a cross-version extension.\nElement `ObservationDefinition.component.qualifiedValue` is not mapped to FHIR STU3, since FHIR R5 `ObservationDefinition` is not mapped.\nElement `ObservationDefinition.component.qualifiedValue` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    }
  ]
}