FHIR © HL7.org  |  FHIRsmith 4.0.1  |  Server Home  |  XIG Home  |  XIG Stats  | 

FHIR IG analytics

Packagehl7.fhir.uv.xver-r4b.r4
Resource TypeConceptMap
IdConceptMap-R4B-AdministrableProductDefinition-element-map-to-R4.json
FHIR VersionR4
Sourcehttp://hl7.org/fhir/uv/xver-r4b.r4/0.1.0/ConceptMap-R4B-AdministrableProductDefinition-element-map-to-R4.html
URLhttp://hl7.org/fhir/uv/xver/ConceptMap/R4B-AdministrableProductDefinition-element-map-to-R4
Version0.1.0
Statusactive
Date2026-03-17T16:03:47.3343503-05:00
NameR4BAdministrableProductDefinitionElementMapToR4
TitleCross-version mapping for FHIR R4B AdministrableProductDefinition to FHIR R4 Basic
Realmuv
Authorityhl7
DescriptionThis ConceptMap represents cross-version mappings for elements from a FHIR R4B AdministrableProductDefinition to FHIR R4.

Resources that use this resource

No resources found

Resources that this resource uses

StructureDefinition
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.administrableDoseFormR4B: The dose form of the final product after necessary reconstitution or processing (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.deviceR4B: A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.formOfR4B: References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.ingredientR4B: The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.producedFromR4B: Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.propertyR4B: Characteristics e.g. a product's onset of action (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.routeOfAdministrationR4B: The path by which the product is taken into or makes contact with the body (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.statusR4B: draft | active | retired | unknown (new)
hl7.fhir.uv.xver-r4b.r4#0.1.0extension-AdministrableProductDefinition.unitOfPresentationR4B: The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (new)

Narrative

Note: links and images are rebased to the (stated) source

Generated Narrative: ConceptMap R4B-AdministrableProductDefinition-element-map-to-R4

Mapping from http://hl7.org/fhir/4.3 to http://hl7.org/fhir/4.0


Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to Basicversion: 4.0.1)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead. Element `AdministrableProductDefinition.meta` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.meta` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead. Element `AdministrableProductDefinition.implicitRules` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.implicitRules` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
AdministrableProductDefinition.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead. Element `AdministrableProductDefinition.language` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
AdministrableProductDefinition.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead. Element `AdministrableProductDefinition.text` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
AdministrableProductDefinition.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead. Element `AdministrableProductDefinition.contained` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.contained` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
AdministrableProductDefinition.identifier (identifier)is equivalent toBasic.identifierElement matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead. Element `AdministrableProductDefinition.identifier` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.identifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: draft | active | retired | unknown (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.status (status)maps to wider conceptExtension (R4B: draft | active | retired | unknown (new))Element `AdministrableProductDefinition.status` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.status` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Allows filtering of administrable products that are appropriate for use versus not.

Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.formOf (formOf)maps to wider conceptExtension (R4B: References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product (new))Element `AdministrableProductDefinition.formOf` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.formOf` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: The dose form of the final product after necessary reconstitution or processing (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.administrableDoseForm (administrableDoseForm)maps to wider conceptExtension (R4B: The dose form of the final product after necessary reconstitution or processing (new))Element `AdministrableProductDefinition.administrableDoseForm` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.administrableDoseForm` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.unitOfPresentation (unitOfPresentation)maps to wider conceptExtension (R4B: The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (new))Element `AdministrableProductDefinition.unitOfPresentation` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.unitOfPresentation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.producedFrom (producedFrom)maps to wider conceptExtension (R4B: Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form (new))Element `AdministrableProductDefinition.producedFrom` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.producedFrom` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.ingredient (ingredient)maps to wider conceptExtension (R4B: The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource (new))Element `AdministrableProductDefinition.ingredient` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.ingredient` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.device (device)maps to wider conceptExtension (R4B: A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product (new))Element `AdministrableProductDefinition.device` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.device` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: Characteristics e.g. a product's onset of action (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.property (property)maps to wider conceptExtension (R4B: Characteristics e.g. a product's onset of action (new))Element `AdministrableProductDefinition.property` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.property` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.property.type (type)maps to wider conceptExtension.extension:type (R4B: A code expressing the type of characteristic (new))Element `AdministrableProductDefinition.property.type` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension. Element `AdministrableProductDefinition.property.type` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.property.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.property.value[x] (value[x])maps to wider conceptExtension.extension:value (R4B: A value for the characteristic (new))Element `AdministrableProductDefinition.property.value[x]` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension. Element `AdministrableProductDefinition.property.value[x]` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.property.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.property.status (status)maps to wider conceptExtension.extension:status (R4B: The status of characteristic e.g. assigned or pending (new))Element `AdministrableProductDefinition.property.status` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension. Element `AdministrableProductDefinition.property.status` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.property.status` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|4.3.0 to R4B: The path by which the product is taken into or makes contact with the body (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
AdministrableProductDefinition.routeOfAdministration (routeOfAdministration)maps to wider conceptExtension (R4B: The path by which the product is taken into or makes contact with the body (new))Element `AdministrableProductDefinition.routeOfAdministration` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.code (code)maps to wider conceptExtension.extension:code (R4B: Coded expression for the route (new))Element `AdministrableProductDefinition.routeOfAdministration.code` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.code` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.firstDose (firstDose)maps to wider conceptExtension.extension:firstDose (R4B: The first dose (dose quantity) administered can be specified for the product (new))Element `AdministrableProductDefinition.routeOfAdministration.firstDose` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.firstDose` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.firstDose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.maxSingleDose (maxSingleDose)maps to wider conceptExtension.extension:maxSingleDose (R4B: The maximum single dose that can be administered (new))Element `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.maxDosePerDay (maxDosePerDay)maps to wider conceptExtension.extension:maxDosePerDay (R4B: The maximum dose quantity to be administered in any one 24-h period (new))Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod (maxDosePerTreatmentPeriod)maps to wider conceptExtension.extension:maxDosePerTreatmentPeriod (R4B: The maximum dose per treatment period that can be administered (new))Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod (maxTreatmentPeriod)maps to wider conceptExtension.extension:maxTreatmentPeriod (R4B: The maximum treatment period during which the product can be administered (new))Element `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies (targetSpecies)maps to wider conceptExtension.extension:targetSpecies (R4B: A species for which this route applies (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies.code (code)maps to wider conceptExtension.extension:targetSpecies.extension:code (R4B: Coded expression for the species (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod (withdrawalPeriod)maps to wider conceptExtension.extension:targetSpecies.extension:withdrawalPeriod (R4B: A species specific time during which consumption of animal product is not appropriate (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue (tissue)maps to wider conceptExtension.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue (R4B: The type of tissue for which the withdrawal period applies, e.g. meat, milk (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value (value)maps to wider conceptExtension.extension:targetSpecies.extension:withdrawalPeriod.extension:value (R4B: A value for the time (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation (supportingInformation)maps to wider conceptExtension.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation (R4B: Extra information about the withdrawal period (new))Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped. Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Source1

{
  "resourceType": "ConceptMap",
  "id": "R4B-AdministrableProductDefinition-element-map-to-R4",
  "text": {
    "status": "generated",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "fhir"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 0,
      "_valueInteger": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4b.r4"
          }
        ]
      }
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use",
      "_valueCode": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4b.r4"
          }
        ]
      }
    }
  ],
  "url": "http://hl7.org/fhir/uv/xver/ConceptMap/R4B-AdministrableProductDefinition-element-map-to-R4",
  "version": "0.1.0",
  "name": "R4BAdministrableProductDefinitionElementMapToR4",
  "title": "Cross-version mapping for FHIR R4B AdministrableProductDefinition to FHIR R4 Basic",
  "status": "active",
  "experimental": false,
  "date": "2026-03-17T16:03:47.3343503-05:00",
  "contact": [
    {
      "name": "FHIR Infrastructure",
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/fiwg"
        }
      ]
    }
  ],
  "description": "This ConceptMap represents cross-version mappings for elements from a FHIR R4B AdministrableProductDefinition to FHIR R4.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001",
          "display": "World"
        }
      ]
    }
  ],
  "sourceCanonical": "http://hl7.org/fhir/4.3",
  "targetUri": "http://hl7.org/fhir/4.0",
  "group": [
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/StructureDefinition/Basic",
      "targetVersion": "4.0.1",
      "element": [
        {
          "code": "AdministrableProductDefinition.meta",
          "display": "meta",
          "target": [
            {
              "code": "Basic.meta",
              "display": "Basic.meta",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `AdministrableProductDefinition.meta` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.meta` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.implicitRules",
          "display": "implicitRules",
          "target": [
            {
              "code": "Basic.implicitRules",
              "display": "Basic.implicitRules",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `AdministrableProductDefinition.implicitRules` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.implicitRules` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.language",
          "display": "language",
          "target": [
            {
              "code": "Basic.language",
              "display": "Basic.language",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `AdministrableProductDefinition.language` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.text",
          "display": "text",
          "target": [
            {
              "code": "Basic.text",
              "display": "Basic.text",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `AdministrableProductDefinition.text` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).\nContained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.contained",
          "display": "contained",
          "target": [
            {
              "code": "Basic.contained",
              "display": "Basic.contained",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `AdministrableProductDefinition.contained` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.contained` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.identifier",
          "display": "identifier",
          "target": [
            {
              "code": "Basic.identifier",
              "display": "Basic.identifier",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.identifier` (`Basic.identifier`), use that element instead.\nElement `AdministrableProductDefinition.identifier` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.identifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.status",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.status",
          "display": "status",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.status` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.status` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).\nAllows filtering of administrable products that are appropriate for use versus not."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.formOf",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.formOf",
          "display": "formOf",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.formOf` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.formOf` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.administrableDoseForm",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.administrableDoseForm",
          "display": "administrableDoseForm",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.administrableDoseForm` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.administrableDoseForm` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.unitOfPresentation",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.unitOfPresentation",
          "display": "unitOfPresentation",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.unitOfPresentation` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.unitOfPresentation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.producedFrom",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.producedFrom",
          "display": "producedFrom",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.producedFrom` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.producedFrom` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.ingredient",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.ingredient",
          "display": "ingredient",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.ingredient` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.ingredient` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.device",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.device",
          "display": "device",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.device` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.device` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.property",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.property",
          "display": "property",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.property` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.property` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.property.type",
          "display": "type",
          "target": [
            {
              "code": "Extension.extension:type",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.property.type` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension.\nElement `AdministrableProductDefinition.property.type` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.property.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.property.value[x]",
          "display": "value[x]",
          "target": [
            {
              "code": "Extension.extension:value",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.property.value[x]` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension.\nElement `AdministrableProductDefinition.property.value[x]` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.property.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.property.status",
          "display": "status",
          "target": [
            {
              "code": "Extension.extension:status",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.property.status` is part of an existing definition because parent element `AdministrableProductDefinition.property` requires a cross-version extension.\nElement `AdministrableProductDefinition.property.status` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.property.status` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition",
      "sourceVersion": "4.3.0",
      "target": "http://hl7.org/fhir/4.3/StructureDefinition/extension-AdministrableProductDefinition.routeOfAdministration",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "AdministrableProductDefinition.routeOfAdministration",
          "display": "routeOfAdministration",
          "target": [
            {
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.code",
          "display": "code",
          "target": [
            {
              "code": "Extension.extension:code",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.code` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.code` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.firstDose",
          "display": "firstDose",
          "target": [
            {
              "code": "Extension.extension:firstDose",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.firstDose` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.firstDose` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.firstDose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.maxSingleDose",
          "display": "maxSingleDose",
          "target": [
            {
              "code": "Extension.extension:maxSingleDose",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.maxSingleDose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.maxDosePerDay",
          "display": "maxDosePerDay",
          "target": [
            {
              "code": "Extension.extension:maxDosePerDay",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.maxDosePerDay` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod",
          "display": "maxDosePerTreatmentPeriod",
          "target": [
            {
              "code": "Extension.extension:maxDosePerTreatmentPeriod",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod",
          "display": "maxTreatmentPeriod",
          "target": [
            {
              "code": "Extension.extension:maxTreatmentPeriod",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies",
          "display": "targetSpecies",
          "target": [
            {
              "code": "Extension.extension:targetSpecies",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies.code",
          "display": "code",
          "target": [
            {
              "code": "Extension.extension:targetSpecies.extension:code",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod",
          "display": "withdrawalPeriod",
          "target": [
            {
              "code": "Extension.extension:targetSpecies.extension:withdrawalPeriod",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue",
          "display": "tissue",
          "target": [
            {
              "code": "Extension.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.tissue` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value",
          "display": "value",
          "target": [
            {
              "code": "Extension.extension:targetSpecies.extension:withdrawalPeriod.extension:value",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation",
          "display": "supportingInformation",
          "target": [
            {
              "code": "Extension.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation",
              "equivalence": "wider",
              "comment": "Element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` is part of an existing definition because parent element `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod` requires a cross-version extension.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` is not mapped to FHIR R4, since FHIR R4B `AdministrableProductDefinition` is not mapped.\nElement `AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    }
  ]
}