FHIR © HL7.org  |  FHIRsmith 4.0.1  |  Server Home  |  XIG Home  |  XIG Stats  | 

FHIR IG analytics

Packagehl7.fhir.uv.xver-r4.r4b
Resource TypeConceptMap
IdConceptMap-R4-MedicinalProductIndication-element-map-to-R4B.json
FHIR VersionR4B
Sourcehttp://hl7.org/fhir/uv/xver-r4.r4b/0.1.0/ConceptMap-R4-MedicinalProductIndication-element-map-to-R4B.html
URLhttp://hl7.org/fhir/uv/xver/ConceptMap/R4-MedicinalProductIndication-element-map-to-R4B
Version0.1.0
Statusactive
Date2026-03-17T16:03:41.7334648-05:00
NameR4MedicinalProductIndicationElementMapToR4B
TitleCross-version mapping for FHIR R4 MedicinalProductIndication to FHIR R4B Basic
Realmuv
Authorityhl7
DescriptionThis ConceptMap represents cross-version mappings for elements from a FHIR R4 MedicinalProductIndication to FHIR R4B.

Resources that use this resource

No resources found


Resources that this resource uses

StructureDefinition
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.comorbidityR4: Comorbidity (concurrent condition) or co-infection as part of the indication (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.diseaseStatusR4: The status of the disease or symptom for which the indication applies (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.diseaseSymptomProcedureR4: The disease, symptom or procedure that is the indication for treatment (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.durationR4: Timing or duration information as part of the indication (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.intendedEffectR4: The intended effect, aim or strategy to be achieved by the indication (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.otherTherapyR4: Information about the use of the medicinal product in relation to other therapies described as part of the indication (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.populationR4: The population group to which this applies (new)
hl7.fhir.uv.xver-r4.r4b#0.1.0extension-MedicinalProductIndication.undesirableEffectR4: Describe the undesirable effects of the medicinal product (new)

Narrative

Note: links and images are rebased to the (stated) source

Generated Narrative: ConceptMap R4-MedicinalProductIndication-element-map-to-R4B

Mapping from http://hl7.org/fhir/4.0 to http://hl7.org/fhir/4.3


Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to Basicversion: 4.3.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.meta (meta)is equivalent toBasic.metaElement matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead. Element `MedicinalProductIndication.meta` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.meta` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
MedicinalProductIndication.implicitRules (implicitRules)is equivalent toBasic.implicitRulesElement matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead. Element `MedicinalProductIndication.implicitRules` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.implicitRules` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
MedicinalProductIndication.language (language)is equivalent toBasic.languageElement matches Basic element path `Basic.language` (`Resource.language`), use that element instead. Element `MedicinalProductIndication.language` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
MedicinalProductIndication.text (text)is equivalent toBasic.textElement matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead. Element `MedicinalProductIndication.text` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.text` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
MedicinalProductIndication.contained (contained)is equivalent toBasic.containedElement matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead. Element `MedicinalProductIndication.contained` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.contained` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
MedicinalProductIndication.subject (subject)is equivalent toBasic.subjectElement matches Basic element path `Basic.subject` (`Basic.subject`), use that element instead. Element `MedicinalProductIndication.subject` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.subject` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: The disease, symptom or procedure that is the indication for treatment (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.diseaseSymptomProcedure (diseaseSymptomProcedure)maps to wider conceptExtension (R4: The disease, symptom or procedure that is the indication for treatment (new))Element `MedicinalProductIndication.diseaseSymptomProcedure` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.diseaseSymptomProcedure` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: The status of the disease or symptom for which the indication applies (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.diseaseStatus (diseaseStatus)maps to wider conceptExtension (R4: The status of the disease or symptom for which the indication applies (new))Element `MedicinalProductIndication.diseaseStatus` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.diseaseStatus` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: Comorbidity (concurrent condition) or co-infection as part of the indication (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.comorbidity (comorbidity)maps to wider conceptExtension (R4: Comorbidity (concurrent condition) or co-infection as part of the indication (new))Element `MedicinalProductIndication.comorbidity` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.comorbidity` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: The intended effect, aim or strategy to be achieved by the indication (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.intendedEffect (intendedEffect)maps to wider conceptExtension (R4: The intended effect, aim or strategy to be achieved by the indication (new))Element `MedicinalProductIndication.intendedEffect` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.intendedEffect` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: Timing or duration information as part of the indication (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.duration (duration)maps to wider conceptExtension (R4: Timing or duration information as part of the indication (new))Element `MedicinalProductIndication.duration` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.duration` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: Information about the use of the medicinal product in relation to other therapies described as part of the indication (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.otherTherapy (otherTherapy)maps to wider conceptExtension (R4: Information about the use of the medicinal product in relation to other therapies described as part of the indication (new))Element `MedicinalProductIndication.otherTherapy` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.otherTherapy` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
MedicinalProductIndication.otherTherapy.therapyRelationshipType (therapyRelationshipType)maps to wider conceptExtension.extension:therapyRelationshipType (R4: The type of relationship between the medicinal product indication or contraindication and another therapy (new))Element `MedicinalProductIndication.otherTherapy.therapyRelationshipType` is part of an existing definition because parent element `MedicinalProductIndication.otherTherapy` requires a cross-version extension. Element `MedicinalProductIndication.otherTherapy.therapyRelationshipType` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.otherTherapy.therapyRelationshipType` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
MedicinalProductIndication.otherTherapy.medication[x] (medication[x])maps to wider conceptExtension.extension:medication (R4: Reference to a specific medication (active substance, medicinal product or class of products) as part of an indication or contraindication (new))Element `MedicinalProductIndication.otherTherapy.medication[x]` is part of an existing definition because parent element `MedicinalProductIndication.otherTherapy` requires a cross-version extension. Element `MedicinalProductIndication.otherTherapy.medication[x]` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.otherTherapy.medication[x]` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: Describe the undesirable effects of the medicinal product (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.undesirableEffect (undesirableEffect)maps to wider conceptExtension (R4: Describe the undesirable effects of the medicinal product (new))Element `MedicinalProductIndication.undesirableEffect` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.undesirableEffect` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication|4.0.1 to R4: The population group to which this applies (new)version: 0.1.0)

Source CodeRelationshipTarget CodeComment
MedicinalProductIndication.population (population)maps to wider conceptExtension (R4: The population group to which this applies (new))Element `MedicinalProductIndication.population` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped. Element `MedicinalProductIndication.population` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

Source1

{
  "resourceType": "ConceptMap",
  "id": "R4-MedicinalProductIndication-element-map-to-R4B",
  "text": {
    "status": "generated",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "fhir"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 0,
      "_valueInteger": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4.r4b"
          }
        ]
      }
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use",
      "_valueCode": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r4.r4b"
          }
        ]
      }
    }
  ],
  "url": "http://hl7.org/fhir/uv/xver/ConceptMap/R4-MedicinalProductIndication-element-map-to-R4B",
  "version": "0.1.0",
  "name": "R4MedicinalProductIndicationElementMapToR4B",
  "title": "Cross-version mapping for FHIR R4 MedicinalProductIndication to FHIR R4B Basic",
  "status": "active",
  "experimental": false,
  "date": "2026-03-17T16:03:41.7334648-05:00",
  "contact": [
    {
      "name": "FHIR Infrastructure",
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/fiwg"
        }
      ]
    }
  ],
  "description": "This ConceptMap represents cross-version mappings for elements from a FHIR R4 MedicinalProductIndication to FHIR R4B.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001",
          "display": "World"
        }
      ]
    }
  ],
  "sourceCanonical": "http://hl7.org/fhir/4.0",
  "targetUri": "http://hl7.org/fhir/4.3",
  "group": [
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/StructureDefinition/Basic",
      "targetVersion": "4.3.0",
      "element": [
        {
          "code": "MedicinalProductIndication.meta",
          "display": "meta",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.meta",
              "display": "Basic.meta",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.meta` (`Resource.meta`), use that element instead.\nElement `MedicinalProductIndication.meta` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.meta` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.implicitRules",
          "display": "implicitRules",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.implicitRules",
              "display": "Basic.implicitRules",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.implicitRules` (`Resource.implicitRules`), use that element instead.\nElement `MedicinalProductIndication.implicitRules` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.implicitRules` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.language",
          "display": "language",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.language",
              "display": "Basic.language",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.language` (`Resource.language`), use that element instead.\nElement `MedicinalProductIndication.language` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.language` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.text",
          "display": "text",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.text",
              "display": "Basic.text",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.text` (`DomainResource.text`), use that element instead.\nElement `MedicinalProductIndication.text` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.text` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).\nContained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.contained",
          "display": "contained",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.contained",
              "display": "Basic.contained",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.contained` (`DomainResource.contained`), use that element instead.\nElement `MedicinalProductIndication.contained` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.contained` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.subject",
          "display": "subject",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "equivalent"
                }
              ],
              "code": "Basic.subject",
              "display": "Basic.subject",
              "equivalence": "equivalent",
              "comment": "Element matches Basic element path `Basic.subject` (`Basic.subject`), use that element instead.\nElement `MedicinalProductIndication.subject` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.subject` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.diseaseSymptomProcedure",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.diseaseSymptomProcedure",
          "display": "diseaseSymptomProcedure",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.diseaseSymptomProcedure` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.diseaseSymptomProcedure` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.diseaseStatus",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.diseaseStatus",
          "display": "diseaseStatus",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.diseaseStatus` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.diseaseStatus` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.comorbidity",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.comorbidity",
          "display": "comorbidity",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.comorbidity` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.comorbidity` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.intendedEffect",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.intendedEffect",
          "display": "intendedEffect",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.intendedEffect` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.intendedEffect` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.duration",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.duration",
          "display": "duration",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.duration` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.duration` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.otherTherapy",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.otherTherapy",
          "display": "otherTherapy",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.otherTherapy` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.otherTherapy` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.otherTherapy.therapyRelationshipType",
          "display": "therapyRelationshipType",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:therapyRelationshipType",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.otherTherapy.therapyRelationshipType` is part of an existing definition because parent element `MedicinalProductIndication.otherTherapy` requires a cross-version extension.\nElement `MedicinalProductIndication.otherTherapy.therapyRelationshipType` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.otherTherapy.therapyRelationshipType` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        },
        {
          "code": "MedicinalProductIndication.otherTherapy.medication[x]",
          "display": "medication[x]",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension.extension:medication",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.otherTherapy.medication[x]` is part of an existing definition because parent element `MedicinalProductIndication.otherTherapy` requires a cross-version extension.\nElement `MedicinalProductIndication.otherTherapy.medication[x]` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.otherTherapy.medication[x]` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.undesirableEffect",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.undesirableEffect",
          "display": "undesirableEffect",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.undesirableEffect` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.undesirableEffect` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MedicinalProductIndication",
      "sourceVersion": "4.0.1",
      "target": "http://hl7.org/fhir/4.0/StructureDefinition/extension-MedicinalProductIndication.population",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MedicinalProductIndication.population",
          "display": "population",
          "target": [
            {
              "modifierExtension": [
                {
                  "url": "http://hl7.org/fhir/1.0/StructureDefinition/extension-ConceptMap.element.target.equivalence",
                  "valueCode": "wider"
                }
              ],
              "code": "Extension",
              "equivalence": "wider",
              "comment": "Element `MedicinalProductIndication.population` is not mapped to FHIR R4B, since FHIR R4 `MedicinalProductIndication` is not mapped.\nElement `MedicinalProductIndication.population` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    }
  ]
}