FHIR IG analytics

Resources that use this resource

No resources found

Resources that this resource uses

Narrative

Note: links and images are rebased to the (stated) source

Source1

{
  "resourceType": "ConceptMap",
  "id": "R3-MessageHeader-element-map-to-R4",
  "text": {
    "status": "generated",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "fhir"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 0,
      "_valueInteger": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r3.r4"
          }
        ]
      }
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use",
      "_valueCode": {
        "extension": [
          {
            "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
            "valueCanonical": "http://hl7.org/fhir/uv/xver/ImplementationGuide/hl7.fhir.uv.xver-r3.r4"
          }
        ]
      }
    }
  ],
  "url": "http://hl7.org/fhir/uv/xver/ConceptMap/R3-MessageHeader-element-map-to-R4",
  "version": "0.1.0",
  "name": "R3MessageHeaderElementMapToR4",
  "title": "Cross-version mapping for FHIR STU3 MessageHeader to FHIR R4 MessageHeader",
  "status": "active",
  "experimental": false,
  "date": "2026-03-17T16:03:24.0589683-05:00",
  "contact": [
    {
      "name": "FHIR Infrastructure",
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/fiwg"
        }
      ]
    }
  ],
  "description": "This ConceptMap represents cross-version mappings for elements from a FHIR STU3 MessageHeader to FHIR R4.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001",
          "display": "World"
        }
      ]
    }
  ],
  "sourceCanonical": "http://hl7.org/fhir/3.0",
  "targetUri": "http://hl7.org/fhir/4.0",
  "group": [
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MessageHeader",
      "sourceVersion": "3.0.2",
      "target": "http://hl7.org/fhir/StructureDefinition/MessageHeader",
      "targetVersion": "4.0.1",
      "element": [
        {
          "code": "MessageHeader.meta",
          "display": "meta",
          "target": [
            {
              "code": "MessageHeader.meta",
              "display": "MessageHeader.meta",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.meta` is mapped to FHIR R4 element `MessageHeader.meta` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.implicitRules",
          "display": "implicitRules",
          "target": [
            {
              "code": "MessageHeader.implicitRules",
              "display": "MessageHeader.implicitRules",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.implicitRules` is mapped to FHIR R4 element `MessageHeader.implicitRules` as `Equivalent`.\nAsserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. \n\nThis element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation."
            }
          ]
        },
        {
          "code": "MessageHeader.language",
          "display": "language",
          "target": [
            {
              "code": "MessageHeader.language",
              "display": "MessageHeader.language",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.language` is mapped to FHIR R4 element `MessageHeader.language` as `Equivalent`.\nLanguage is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies  to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource  Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute)."
            }
          ]
        },
        {
          "code": "MessageHeader.text",
          "display": "text",
          "target": [
            {
              "code": "MessageHeader.text",
              "display": "MessageHeader.text",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.text` is mapped to FHIR R4 element `MessageHeader.text` as `Equivalent`.\nContained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded in formation is added later."
            }
          ]
        },
        {
          "code": "MessageHeader.contained",
          "display": "contained",
          "target": [
            {
              "code": "MessageHeader.contained",
              "display": "MessageHeader.contained",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.contained` is mapped to FHIR R4 element `MessageHeader.contained` as `Equivalent`.\nThis should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again."
            }
          ]
        },
        {
          "code": "MessageHeader.event",
          "display": "event",
          "target": [
            {
              "code": "MessageHeader.event[x]",
              "display": "MessageHeader.event[x]",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.event` is mapped to FHIR R4 element `MessageHeader.event[x]` as `Equivalent`.\nThe target context `MessageHeader.event[x]` is a choice-type element and cannot directly hold extensions. The context is moved up to parent element `MessageHeader`."
            }
          ]
        },
        {
          "code": "MessageHeader.destination",
          "display": "destination",
          "target": [
            {
              "code": "MessageHeader.destination",
              "display": "MessageHeader.destination",
              "equivalence": "wider",
              "comment": "Element `MessageHeader.destination` is mapped to FHIR R4 element `MessageHeader.destination` as `Equivalent`.\nThere SHOULD be at least one destination, but in some circumstances, the source system is unaware of any particular destination system."
            }
          ]
        },
        {
          "code": "MessageHeader.destination.name",
          "display": "name",
          "target": [
            {
              "code": "MessageHeader.destination.name",
              "display": "MessageHeader.destination.name",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.destination.name` is mapped to FHIR R4 element `MessageHeader.destination.name` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.destination.target",
          "display": "target",
          "target": [
            {
              "code": "MessageHeader.destination.target",
              "display": "MessageHeader.destination.target",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.destination.target` is mapped to FHIR R4 element `MessageHeader.destination.target` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.destination.endpoint",
          "display": "endpoint",
          "target": [
            {
              "code": "MessageHeader.destination.endpoint",
              "display": "MessageHeader.destination.endpoint",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.destination.endpoint` is mapped to FHIR R4 element `MessageHeader.destination.endpoint` as `Equivalent`.\nThe id may be a non-resolvable URI for systems that do not use standard network-based addresses."
            }
          ]
        },
        {
          "code": "MessageHeader.receiver",
          "display": "receiver",
          "target": [
            {
              "code": "MessageHeader.destination.receiver",
              "display": "MessageHeader.destination.receiver",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.receiver` is mapped to FHIR R4 element `MessageHeader.destination.receiver` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.sender",
          "display": "sender",
          "target": [
            {
              "code": "MessageHeader.sender",
              "display": "MessageHeader.sender",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.sender` is mapped to FHIR R4 element `MessageHeader.sender` as `Equivalent`.\nUse case is for where a (trusted) sending system is responsible for multiple organizations, and therefore cannot differentiate based on source endpoint / authentication alone."
            }
          ]
        },
        {
          "code": "MessageHeader.enterer",
          "display": "enterer",
          "target": [
            {
              "code": "MessageHeader.enterer",
              "display": "MessageHeader.enterer",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.enterer` is mapped to FHIR R4 element `MessageHeader.enterer` as `Equivalent`.\nUsually only for the request, but can be used in a response."
            }
          ]
        },
        {
          "code": "MessageHeader.author",
          "display": "author",
          "target": [
            {
              "code": "MessageHeader.author",
              "display": "MessageHeader.author",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.author` is mapped to FHIR R4 element `MessageHeader.author` as `Equivalent`.\nUsually only for the request, but can be used in a response."
            }
          ]
        },
        {
          "code": "MessageHeader.source",
          "display": "source",
          "target": [
            {
              "code": "MessageHeader.source",
              "display": "MessageHeader.source",
              "equivalence": "wider",
              "comment": "Element `MessageHeader.source` is mapped to FHIR R4 element `MessageHeader.source` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.source.name",
          "display": "name",
          "target": [
            {
              "code": "MessageHeader.source.name",
              "display": "MessageHeader.source.name",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.source.name` is mapped to FHIR R4 element `MessageHeader.source.name` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.source.software",
          "display": "software",
          "target": [
            {
              "code": "MessageHeader.source.software",
              "display": "MessageHeader.source.software",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.source.software` is mapped to FHIR R4 element `MessageHeader.source.software` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.source.version",
          "display": "version",
          "target": [
            {
              "code": "MessageHeader.source.version",
              "display": "MessageHeader.source.version",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.source.version` is mapped to FHIR R4 element `MessageHeader.source.version` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.source.contact",
          "display": "contact",
          "target": [
            {
              "code": "MessageHeader.source.contact",
              "display": "MessageHeader.source.contact",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.source.contact` is mapped to FHIR R4 element `MessageHeader.source.contact` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.source.endpoint",
          "display": "endpoint",
          "target": [
            {
              "code": "MessageHeader.source.endpoint",
              "display": "MessageHeader.source.endpoint",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.source.endpoint` is mapped to FHIR R4 element `MessageHeader.source.endpoint` as `Equivalent`.\nThe id may be a non-resolvable URI for systems that do not use standard network-based addresses."
            }
          ]
        },
        {
          "code": "MessageHeader.responsible",
          "display": "responsible",
          "target": [
            {
              "code": "MessageHeader.responsible",
              "display": "MessageHeader.responsible",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.responsible` is mapped to FHIR R4 element `MessageHeader.responsible` as `Equivalent`.\nUsually only for the request, but can be used in a response."
            }
          ]
        },
        {
          "code": "MessageHeader.reason",
          "display": "reason",
          "target": [
            {
              "code": "MessageHeader.reason",
              "display": "MessageHeader.reason",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.reason` is mapped to FHIR R4 element `MessageHeader.reason` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.response",
          "display": "response",
          "target": [
            {
              "code": "MessageHeader.response",
              "display": "MessageHeader.response",
              "equivalence": "wider",
              "comment": "Element `MessageHeader.response` is mapped to FHIR R4 element `MessageHeader.response` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.response.identifier",
          "display": "identifier",
          "target": [
            {
              "code": "MessageHeader.response.identifier",
              "display": "MessageHeader.response.identifier",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.response.identifier` is mapped to FHIR R4 element `MessageHeader.response.identifier` as `Equivalent`."
            }
          ]
        },
        {
          "code": "MessageHeader.response.code",
          "display": "code",
          "target": [
            {
              "code": "MessageHeader.response.code",
              "display": "MessageHeader.response.code",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.response.code` is mapped to FHIR R4 element `MessageHeader.response.code` as `Equivalent`.\nThis is a generic response to the request message. Specific data for the response will be found in MessageHeader.focus."
            }
          ]
        },
        {
          "code": "MessageHeader.response.details",
          "display": "details",
          "target": [
            {
              "code": "MessageHeader.response.details",
              "display": "MessageHeader.response.details",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.response.details` is mapped to FHIR R4 element `MessageHeader.response.details` as `Equivalent`.\nThis SHALL be contained in the bundle. If any of the issues are errors, the response code SHALL be an error."
            }
          ]
        },
        {
          "code": "MessageHeader.focus",
          "display": "focus",
          "target": [
            {
              "code": "MessageHeader.focus",
              "display": "MessageHeader.focus",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.focus` is mapped to FHIR R4 element `MessageHeader.focus` as `Equivalent`.\nThe data is defined where the transaction type is defined. The transaction data is always included in the bundle that is the full message.  Only the root resource is specified.  The resources it references should be contained in the bundle but are not also listed here.  Multiple repetitions are allowed to cater for merges and other situations with multiple focal targets."
            }
          ]
        }
      ]
    },
    {
      "source": "http://hl7.org/fhir/StructureDefinition/MessageHeader",
      "sourceVersion": "3.0.2",
      "target": "http://hl7.org/fhir/3.0/StructureDefinition/extension-MessageHeader.timestamp",
      "targetVersion": "0.1.0",
      "element": [
        {
          "code": "MessageHeader.timestamp",
          "display": "timestamp",
          "target": [
            {
              "code": "Extension",
              "equivalence": "equivalent",
              "comment": "Element `MessageHeader.timestamp` has a context of MessageHeader based on following the parent source element upwards and mapping to `MessageHeader`.\nElement `MessageHeader.timestamp` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element)."
            }
          ]
        }
      ]
    }
  ]
}