FHIR IG analytics| Package | hl7.fhir.uv.xver-r2.r5 |
| Resource Type | ValueSet |
| Id | ValueSet-R2-dataelement-stringency-for-R5.json |
| FHIR Version | R5 |
| Source | http://hl7.org/fhir/uv/xver-r2.r5/0.0.1-snapshot-2/ValueSet-R2-dataelement-stringency-for-R5.html |
| URL | http://hl7.org/fhir/1.0/ValueSet/R2-dataelement-stringency-for-R5 |
| Version | 0.0.1-snapshot-2 |
| Status | active |
| Date | 2025-09-01T22:35:38.919814+10:00 |
| Name | R2_dataelement_stringency_for_R5 |
| Title | Cross-version VS for R2.DataElementStringency for use in FHIR R5 |
| Realm | uv |
| Authority | hl7 |
| Description | This cross-version ValueSet represents concepts from http://hl7.org/fhir/ValueSet/dataelement-stringency|1.0.2 for use in FHIR R5. Concepts not present here have direct `equivalent` mappings crossing all versions from R2 to R5. |
No resources found
| CodeSystem | |
| dataelement-stringency | dataelement-stringency |
Note: links and images are rebased to the (stated) source
Generated Narrative: ValueSet R2-dataelement-stringency-for-R5
This value set expansion contains 6 concepts.
| Code | System | Display | Definition |
| fully-specified | http://hl7.org/fhir/dataelement-stringency | Fully Specified | The data element is fully specified down to a single value set, single unit of measure, single data type, etc. Multiple pieces of data associated with this data element are fully comparable. |
| equivalent | http://hl7.org/fhir/dataelement-stringency | Equivalent | The data element allows multiple units of measure having equivalent meaning; e.g. "cc" (cubic centimeter) and "mL" (milliliter). |
| scaleable | http://hl7.org/fhir/dataelement-stringency | Scaleable | A convertable data element where unit conversions are different only by a power of 10; e.g. g, mg, kg. |
| convertable | http://hl7.org/fhir/dataelement-stringency | Convertable | The data element allows multiple units of measure that are convertable between each other (e.g. inches and centimeters) and/or allows data to be captured in multiple value sets for which a known mapping exists allowing conversion of meaning. |
| comparable | http://hl7.org/fhir/dataelement-stringency | Comparable | The data element is sufficiently well-constrained that multiple pieces of data captured according to the constraints of the data element will be comparable (though in some cases, a degree of automated conversion/normalization may be required). |
| flexible | http://hl7.org/fhir/dataelement-stringency | Flexible | The data element is unconstrained in units, choice of data types and/or choice of vocabulary such that automated comparison of data captured using the data element is not possible. |
FHIR
FHIRsmith{
"resourceType": "ValueSet",
"id": "R2-dataelement-stringency-for-R5",
"text": {
"status": "generated",
"div": "<!-- snip (see above) -->"
},
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
"valueCode": "fhir"
},
{
"extension": [
{
"url": "packageId",
"valueId": "hl7.fhir.uv.xver-r2.r5"
},
{
"url": "version",
"valueString": "0.0.1-snapshot-2"
}
],
"url": "http://hl7.org/fhir/StructureDefinition/package-source"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
"valueInteger": 0,
"_valueInteger": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
"valueCanonical": "http://hl7.org/fhir/1.0/ImplementationGuide/hl7.fhir.uv.xver-r2.r5"
}
]
}
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
"valueCode": "trial-use",
"_valueCode": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-conformance-derivedFrom",
"valueCanonical": "http://hl7.org/fhir/1.0/ImplementationGuide/hl7.fhir.uv.xver-r2.r5"
}
]
}
}
],
"url": "http://hl7.org/fhir/1.0/ValueSet/R2-dataelement-stringency-for-R5",
"version": "0.0.1-snapshot-2",
"name": "R2_dataelement_stringency_for_R5",
"title": "Cross-version VS for R2.DataElementStringency for use in FHIR R5",
"status": "active",
"experimental": false,
"date": "2025-09-01T22:35:38.919814+10:00",
"publisher": "FHIR Infrastructure",
"contact": [
{
"name": "FHIR Infrastructure",
"telecom": [
{
"system": "url",
"value": "http://www.hl7.org/Special/committees/fiwg"
}
]
}
],
"description": "This cross-version ValueSet represents concepts from http://hl7.org/fhir/ValueSet/dataelement-stringency|1.0.2 for use in FHIR R5. Concepts not present here have direct `equivalent` mappings crossing all versions from R2 to R5.",
"jurisdiction": [
{
"coding": [
{
"system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
"code": "001",
"display": "World"
}
]
}
],
"compose": {
"include": [
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"concept": [
{
"code": "fully-specified",
"display": "Fully Specified"
},
{
"code": "equivalent",
"display": "Equivalent"
},
{
"code": "scaleable",
"display": "Scaleable"
},
{
"code": "convertable",
"display": "Convertable"
},
{
"code": "comparable",
"display": "Comparable"
},
{
"code": "flexible",
"display": "Flexible"
}
]
}
]
},
"expansion": {
"timestamp": "2025-09-01T22:35:38.91977+10:00",
"contains": [
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "fully-specified",
"display": "Fully Specified"
},
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "equivalent",
"display": "Equivalent"
},
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "scaleable",
"display": "Scaleable"
},
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "convertable",
"display": "Convertable"
},
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "comparable",
"display": "Comparable"
},
{
"system": "http://hl7.org/fhir/dataelement-stringency",
"version": "1.0.2",
"code": "flexible",
"display": "Flexible"
}
]
}
}