FHIR IG Statistics: StructureDefinition/cqf-fhirQueryPattern

Resources that use this resource

No resources found

Resources that this resource uses

No resources found

Narrative

Note: links and images are rebased to the (stated) source

Generated Narrative: StructureDefinition cqf-fhirQueryPattern

Name	Flags	Card.	Type	Description & Constraints
Extension		0..*	Extension	What FHIR query?
url		1..1	uri	"http://hl7.org/fhir/StructureDefinition/cqf-fhirQueryPattern"
value[x]		1..1	string	Value of extension
Documentation for this format

Source

{
  "resourceType": "StructureDefinition",
  "id": "cqf-fhirQueryPattern",
  "text": {
    "status": "extensions",
    "div": "<!-- snip (see above) -->"
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
      "valueInteger": 3
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
      "valueCode": "cds"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
      "valueCode": "trial-use"
    },
    {
      "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-type-characteristics",
      "valueCode": "can-bind"
    }
  ],
  "url": "http://hl7.org/fhir/StructureDefinition/cqf-fhirQueryPattern",
  "identifier": [
    {
      "system": "urn:ietf:rfc:3986",
      "value": "urn:oid:2.16.840.1.113883.4.642.5.1586"
    }
  ],
  "version": "5.3.0-ballot",
  "name": "FHIRQueryPattern",
  "title": "FHIR Query Pattern",
  "status": "active",
  "experimental": false,
  "date": "2021-11-27T13:31:32-07:00",
  "publisher": "HL7 International / Clinical Decision Support",
  "contact": [
    {
      "telecom": [
        {
          "system": "url",
          "value": "http://www.hl7.org/Special/committees/dss"
        }
      ]
    }
  ],
  "description": "A FHIR Query URL pattern that corresponds to the data specified by the data requirement. If multiple FHIR Query URLs are present, they each contribute to the data specified by the data requirement (i.e. the union of the results of the FHIR Queries represents the complete data for the data requirement). This is not a resolveable URL, in that it will contain 1) No base canonical (i.e. it's a relative query), and 2) Parameters using tokens that are delimited using double-braces and the context parameters are dependent solely on the subjectType, according to the following: Patient: context.patientId, Practitioner: context.practitionerId, Organization: context.organizationId, Location: context.locationId, Device: context.deviceId. For example, for a Library with a subjectType of Patient, the context parameter `{{context.patientId}}` will be used as a token to be replaced with the `id` of the Patient in context. This extension is used primarily to address the use case for satisfying a data requirement for a single subject. However, the query pattern could also be used to satisfy population level requests by removing the subject-level filter from the query.",
  "jurisdiction": [
    {
      "coding": [
        {
          "system": "http://unstats.un.org/unsd/methods/m49/m49.htm",
          "code": "001"
        }
      ]
    }
  ],
  "fhirVersion": "5.0.0",
  "mapping": [
    {
      "identity": "rim",
      "uri": "http://hl7.org/v3",
      "name": "RIM Mapping"
    }
  ],
  "kind": "complex-type",
  "abstract": false,
  "context": [
    {
      "type": "element",
      "expression": "DataRequirement"
    }
  ],
  "type": "Extension",
  "baseDefinition": "http://hl7.org/fhir/StructureDefinition/Extension",
  "derivation": "constraint",
  "snapshot": {
    "extension": [
      {
        "url": "http://hl7.org/fhir/tools/StructureDefinition/snapshot-base-version",
        "valueString": "5.0.0"
      }
    ],
    "element": [
      {
        "id": "Extension",
        "path": "Extension",
        "short": "What FHIR query?",
        "definition": "A FHIR Query URL pattern that corresponds to the data specified by the data requirement. If multiple FHIR Query URLs are present, they each contribute to the data specified by the data requirement (i.e. the union of the results of the FHIR Queries represents the complete data for the data requirement). This is not a resolveable URL, in that it will contain 1) No base canonical (i.e. it's a relative query), and 2) Parameters using tokens that are delimited using double-braces and the context parameters are dependent solely on the subjectType, according to the following: Patient: context.patientId, Practitioner: context.practitionerId, Organization: context.organizationId, Location: context.locationId, Device: context.deviceId. For example, for a Library with a subjectType of Patient, the context parameter `{{context.patientId}}` will be used as a token to be replaced with the `id` of the Patient in context. This extension is used primarily to address the use case for satisfying a data requirement for a single subject. However, the query pattern could also be used to satisfy population level requests by removing the subject-level filter from the query.",
        "comment": "Supports communicating a FHIR query (or set of queries) for the given data requirement. The query is server-specific, and will need to be created as informed by a CapabilityStatement. The $data-requirements operation should be expected to be able to provide an Endpoint or CapabilityStatement to provide this information.; If no endpoint or capability statement is provided, the capability statement of the server performing the operation is used.",
        "min": 0,
        "max": "*",
        "base": {
          "path": "Extension",
          "min": 0,
          "max": "*"
        },
        "constraint": [
          {
            "key": "ele-1",
            "severity": "error",
            "human": "All FHIR elements must have a @value or children",
            "expression": "hasValue() or (children().count() > id.count())",
            "source": "http://hl7.org/fhir/StructureDefinition/Element"
          },
          {
            "key": "ext-1",
            "severity": "error",
            "human": "Must have either extensions or value[x], not both",
            "expression": "extension.exists() != value.exists()",
            "source": "http://hl7.org/fhir/StructureDefinition/Extension"
          }
        ],
        "isModifier": false
      },
      {
        "id": "Extension.id",
        "path": "Extension.id",
        "representation": [
          "xmlAttr"
        ],
        "short": "Unique id for inter-element referencing",
        "definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
        "min": 0,
        "max": "1",
        "base": {
          "path": "Element.id",
          "min": 0,
          "max": "1"
        },
        "type": [
          {
            "extension": [
              {
                "url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-fhir-type",
                "valueUrl": "id"
              }
            ],
            "code": "http://hl7.org/fhirpath/System.String"
          }
        ],
        "condition": [
          "ele-1"
        ],
        "isModifier": false,
        "isSummary": false,
        "mapping": [
          {
            "identity": "rim",
            "map": "n/a"
          }
        ]
      },
      {
        "id": "Extension.extension",
        "path": "Extension.extension",
        "slicing": {
          "discriminator": [
            {
              "type": "value",
              "path": "url"
            }
          ],
          "description": "Extensions are always sliced by (at least) url",
          "rules": "open"
        },
        "short": "Additional content defined by implementations",
        "definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
        "comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
        "alias": [
          "extensions",
          "user content"
        ],
        "min": 0,
        "max": "*",
        "base": {
          "path": "Element.extension",
          "min": 0,
          "max": "*"
        },
        "type": [
          {
            "code": "Extension"
          }
        ],
        "constraint": [
          {
            "key": "ele-1",
            "severity": "error",
            "human": "All FHIR elements must have a @value or children",
            "expression": "hasValue() or (children().count() > id.count())",
            "source": "http://hl7.org/fhir/StructureDefinition/Element"
          },
          {
            "key": "ext-1",
            "severity": "error",
            "human": "Must have either extensions or value[x], not both",
            "expression": "extension.exists() != value.exists()",
            "source": "http://hl7.org/fhir/StructureDefinition/Extension"
          }
        ],
        "isModifier": false,
        "isSummary": false,
        "mapping": [
          {
            "identity": "rim",
            "map": "n/a"
          }
        ]
      },
      {
        "id": "Extension.url",
        "path": "Extension.url",
        "representation": [
          "xmlAttr"
        ],
        "short": "identifies the meaning of the extension",
        "definition": "Source of the definition for the extension code - a logical name or a URL.",
        "comment": "The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.",
        "min": 1,
        "max": "1",
        "base": {
          "path": "Extension.url",
          "min": 1,
          "max": "1"
        },
        "type": [
          {
            "code": "uri"
          }
        ],
        "fixedUri": "http://hl7.org/fhir/StructureDefinition/cqf-fhirQueryPattern",
        "isModifier": false,
        "isSummary": false,
        "mapping": [
          {
            "identity": "rim",
            "map": "N/A"
          }
        ]
      },
      {
        "id": "Extension.value[x]",
        "path": "Extension.value[x]",
        "short": "Value of extension",
        "definition": "Value of extension - must be one of a constrained set of the data types (see [Extensibility](http://hl7.org/fhir/R5/extensibility.html) for a list).",
        "min": 1,
        "max": "1",
        "base": {
          "path": "Extension.value[x]",
          "min": 0,
          "max": "1"
        },
        "type": [
          {
            "code": "string"
          }
        ],
        "condition": [
          "ext-1"
        ],
        "constraint": [
          {
            "key": "ele-1",
            "severity": "error",
            "human": "All FHIR elements must have a @value or children",
            "expression": "hasValue() or (children().count() > id.count())",
            "source": "http://hl7.org/fhir/StructureDefinition/Element"
          }
        ],
        "isModifier": false,
        "isSummary": false,
        "mapping": [
          {
            "identity": "rim",
            "map": "N/A"
          }
        ]
      }
    ]
  },
  "differential": {
    "element": [
      {
        "id": "Extension",
        "path": "Extension",
        "short": "What FHIR query?",
        "definition": "A FHIR Query URL pattern that corresponds to the data specified by the data requirement. If multiple FHIR Query URLs are present, they each contribute to the data specified by the data requirement (i.e. the union of the results of the FHIR Queries represents the complete data for the data requirement). This is not a resolveable URL, in that it will contain 1) No base canonical (i.e. it's a relative query), and 2) Parameters using tokens that are delimited using double-braces and the context parameters are dependent solely on the subjectType, according to the following: Patient: context.patientId, Practitioner: context.practitionerId, Organization: context.organizationId, Location: context.locationId, Device: context.deviceId. For example, for a Library with a subjectType of Patient, the context parameter `{{context.patientId}}` will be used as a token to be replaced with the `id` of the Patient in context. This extension is used primarily to address the use case for satisfying a data requirement for a single subject. However, the query pattern could also be used to satisfy population level requests by removing the subject-level filter from the query.",
        "comment": "Supports communicating a FHIR query (or set of queries) for the given data requirement. The query is server-specific, and will need to be created as informed by a CapabilityStatement. The $data-requirements operation should be expected to be able to provide an Endpoint or CapabilityStatement to provide this information.; If no endpoint or capability statement is provided, the capability statement of the server performing the operation is used.",
        "min": 0,
        "max": "*"
      },
      {
        "id": "Extension.url",
        "path": "Extension.url",
        "type": [
          {
            "code": "uri"
          }
        ],
        "fixedUri": "http://hl7.org/fhir/StructureDefinition/cqf-fhirQueryPattern"
      },
      {
        "id": "Extension.value[x]",
        "path": "Extension.value[x]",
        "min": 1,
        "type": [
          {
            "code": "string"
          }
        ]
      }
    ]
  }
}